Re: Static electricity problem

w_tom wrote:

  You have the right idea.  But static electricity is not
seeking earth ground.  Earthing is not part of a static
electric discharge circuit.  Somehow your body discharge is
forming a complete circuit through computer.  This is why
motherboards are often mounted on chassis plate with only one
ground interconnect.

Modern motherboards never have 'one ground connect' unless one goes through gyrations to defeat the built-in grounding scheme.

If the static current discharge was
using motherboard copper traces as part of its path (due to
multiple connections to chassis plate), then ICs on that
motherboard are seeing voltage differences across the board. These tenths of volts difference between ground pins on ICs
cause software crashes.

  Other paths can also exist.  One might be through keyboard,
into computer, down safety ground wire, through latex wall
paint, into floor, and back to you.  Another example of a
complete circuit.

Going to be a bitch getting his charge to fly through the air from his *wireless keyboard* to the computer.

Not to mention that charge takes the path of least resistance and across the room and back through floors and latex wall paint ain't it.

  You have the right idea.  We want sufficient humidity and
wrist straps connected to chassis when ever anyone works on
electronics.  BTW, same can even apply to a digital camera
when connected or disconnected via USB port.  It is also why
we prefer cotton (or better is polyester cotton) instead of
nylon.

  Insulating, absorbing, or blocking such transients (be it
static electricity or the one outside called lightning) is a
fool's errand.  We start by making the transient not generated
AND make conductive paths to shunt (divert, discharge,
redirect) that transient on paths that are not destructive.

  Sold are special conductive plastic mats for desktop and for
floor that are better electrical conductors specifically to
discharge static electricity.  Even provided with connector
and wire to complete the discharge circuits.

This is but another example of why we want a single point
ground - be it to remove hum in a stereo, static electric
discharge to computer, or lightning strike to a building. Ground loops through wrong things cause failures.

I'm still waiting for you to tell me where the 'single point earth' is in aircraft.


-Lone_Wolf- wrote:

Recently (since the humidity has dropped around here), I have had
a problem with my latest machine.

Whenever my long haired cat rubs up against my legs my PC instantly powers
off and reboots (even though I may be no where near the PC - note I use
wireless keyboard and mouse). I am assuming its because the box is sitting
on top of the plastic floor mat and the charge is running down my leg, into
the mat, and then through the PC to the ground in the house wiring. So far
it has not hurt anything and I have not lost any important work, but I do
need to stop this from happening.

Moving the box is out of the question due to space constraints but I could
try to insulate it from the mat better. I have also considered riveting a
grounding cable to the mat and running it directly to the ground line in the
house wiring.

Could I have missed something in my installation of the motherboard that is
not correctly protecting the board?

John 

.

Relevant Pages

  • Re: Static electricity problem
    ... But static electricity is not ... electric discharge circuit. ... Somehow your body discharge is ... > the mat, and then through the PC to the ground in the house wiring. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: How to properly discharge static electricity?
    ... IOW a charge generated from shoes ... Any discharge path that conducts through ... > address the 'grounding' of static electricity. ... > perfect conductor. ...
    (microsoft.public.windowsxp.hardware)
  • Static Electricity Throwing Someone Across the Room?
    ... On this INTP list I subscribe to, a woman related an incident in which she ... was "thrown across the room" by a discharge of static electricity from her ...
    (sci.physics)
  • Re: How to properly discharge static electricity?
    ... Charge travels up you hand, ... down table to floor and back to shoes. ... then connect an anti static wrist strap to discharge your ... The only ground involved is static electricity is the one ...
    (microsoft.public.windowsxp.hardware)