Re: PC is dead after installing new board

Bob H wrote:

Can you tell me what a single point ground is in realtion to a motherboard? Does it mean only one connection/standoff should be ground?
Thanks

You can ignore that as modern motherboards intentionally have multiple grounding points.


w_tom wrote:

  The proper way to mount a motherboard to that plate is the
single point ground.  Only one connection from motherboard
ground to steel plate.  All others should be non-conductive
(ie nylon).  The single connection from motherboard to chassis
is located adjacent to were IO and power supply connections
are located.  This makes the entire system less susceptible to
crashes due to transients such as static electric discharges
to the case.

  Intel even has specs for where this single electrical
connection should be located.  Defined in a technical
descriptions for how ATX pc board layout.  Long since lost the
spec, but the principles are well proven.  Motherboard should
have only a single conductive connection to its mounting
plate.

Bob H wrote:

OJ, yes it certainly is somewhere. I have insulated the screw mountings
and put it in, then tried it after each screw, then I found that the
short is bang in the middle somwhere, because if I put a screw in the
middle, it goes dead,but when I take that screw out it works ok.
Thanks





.

Relevant Pages

  • Re: PC is dead after installing new board
    ... Only one connection from motherboard ground to steel plate. ... The single connection from motherboard to chassis is located adjacent to were IO and power supply connections are located. ... short is bang in the middle somwhere, because if I put a screw in the ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: PC is dead after installing new board
    ... The proper way to mount a motherboard to that plate is the ... The single connection from motherboard to chassis ... I have insulated the screw mountings ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Network Unavailable After Wake From Standby
    ... > with onboard Gigabit LAN. ... > through a router (all the service information is stored ... > on my router and Windows XP just detects the connection ... > would exchange my motherboard if I want. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Stupid Windows XP!
    ... A PCI card USB is inserted in one of the slot connectors on the motherboard,(main circuitboard which is what everything else is attached to). ... But how would I find out if I have a PCI Card or a direct connection on the Motherboard? ... with Windows 2000 and Millennium, on my Windows XP Professional computer I ...
    (microsoft.public.windowsxp.hardware)
  • Re: PC is dead after installing new board
    ... >>> The proper way to mount a motherboard to that plate is the ... The single connection from motherboard to chassis ... >>> crashes due to transients such as static electric discharges ... >>> Intel even has specs for where this single electrical ...
    (alt.comp.hardware.pc-homebuilt)