Hot Power Supply

My Antec SL350 when taken off has the last 3 pins of the 20-pin power
connector burnt to a brown
color. The pins correlate to the 3.3v which are orange in color. Is the
problem from the power supply
or the motherboard? ASUS Probe did show the 3.3v at around 2.8v before
I took the SL350 out.
Also, I replace the SL350 with a Antec NeoPower480 and it showed the
3.3v to be around 3.1v and
the 5v around 4.8v. The 12v is at 11.87v. Where is the problem? Is it
the power supplies or the
motherboard?

.

Relevant Pages

  • Linux computer wont boot-up without reset?
    ... I have an Abit NF7S motherboard with an Antec SmartBlue 350W PS, ... hit the reset switch. ... properly with just the power on switch. ...
    (comp.os.linux.hardware)
  • Re: Hot Power Supply
    ... The pins correlate to the 3.3v which are orange in color. ... > problem from the power supply ... > or the motherboard? ... it sounds like you're drawing more power than the PSU ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Computer wont power up
    ... power button or the power supply. ... I bought a new case but it ... Next thought it was the motherboard, ... not even Antec. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: a7v600-x stuck in reboot loop?
    ... I forgot to say that I think this is a motherboard defect. ... > [CPU Specification] ... So I hold the power button in till computer shuts off ... > once or twice sometimes more before the video initializes. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: a7v600-x stuck in reboot loop?
    ... [Motherboard Specification] ... [CPU Specification] ... So I hold the power button in till computer shuts off ... once or twice sometimes more before the video initializes. ...
    (alt.comp.periphs.mainboard.asus)