Re: How do i change my CD/DVD drive to slave?


"old jon" <ImNotIn@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:wzvHe.21677$bT4.10595@xxxxxxxxxxxxxxxxxxxxxxx
>
> <potnisanish@xxxxxxxxx> wrote in message
> news:1122922158.771135.262400@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >I have a Toshiba SD-R5372 optical drive, and I am wondering how to
> > change it from being the master, to being the slave.
> >
> >
> > It came as the optical drive being master, and the hard drive being
> > slave, but I need to switch that around.
> >
> On the back of each device there are 3 sets of pins with 1 little jumper.
> These are marked.
> At the moment yours are set as Tosh = master. HD = slave. Just move the
> little jumpers to the correct positions.
> bw..OJ
>
If both devices are set to CS (Cable Select) you need to reverse the
connections on the ribbon cable so that the HD is on the end connector and
optical drive is on centre connector.
Mike.


.

Loading