Re: New Pid on Block


"Bob Ross" <bobross425@xxxxxxxxxxxxxx> wrote in message
news:bRWtl.12791$5t4.4148@xxxxxxxxxxxxxxx
anthony wrote:
Here's my brand-new PID kit, installed today. I actually installed it
yesterday and ran into some trouble, but Jim in the States was able to
resolve my issue immediately via the internet.
As you can see if you take the time to cruise to www.coffeesnobs.com.au
via the link below, I've opted for the full-blown installation via a
half-inch hole drilled through the black iron strip down the Silvia's
side. Although the pic shows Jim's suggested setting of 228 F (109 C),
I've since set it at 224 (106.7 C), which seems better here at my
altitude of 1065 meters above sea-level. I've left the PID's settings
at Fahrenheit instead of Celsius because of the slightly more
effective temp control Fahrenheit provides. But give me a week and
I'll probably move back to Celsius!
If anyone with an unpidded Silvia still needs recommendations, I
endorse Jim's mod to the full. Just go to Pidkits.com. End of unpaid
ad ..... and thanks again, Jim.
The pic is at:
http://coffeesnobs.com.au/YaBB.pl?board=BrewMid

Cool. I'm at a high altitude also. I have my PID set at 223F. This seems
to be the best setting for me.

Bob



Sorry I can't reply to Anthony's post, as it doesn't show up in my
mozzarella.

Can you tell me - anyone - which one of these you bought on this page?
http://pidkits.com/kits.html

Thanks.
Dee Dee


.

Relevant Pages

  • Re: New Pid on Block
    ... I'll probably move back to Celsius! ... and thanks again, Jim. ... Dee Dee ... I bought a slightly-used Watlow 965 but it won't show on Jim's page ...
    (alt.coffee)
  • Re: New Pid on Block
    ... resolve my issue immediately via the internet. ... effective temp control Fahrenheit provides. ... I'll probably move back to Celsius! ... and thanks again, Jim. ...
    (alt.coffee)
  • Re: New Pid on Block
    ... effective temp control Fahrenheit provides. ... I'll probably move back to Celsius! ... and thanks again, Jim. ... Plus Jim helped me develop the kits I have for the Gaggia's, ...
    (alt.coffee)
  • New Pid on Block
    ... I've opted for the full-blown installation via a ... effective temp control Fahrenheit provides. ... I'll probably move back to Celsius! ... and thanks again, Jim. ...
    (alt.coffee)
  • Re: Wheres Dee Dee?
    ... Hi Dee Dee! ... Happy people plan actions, they don't plan results. ... this surgery can do that ... ... it's been up and down with Jim. ...
    (rec.crafts.textiles.yarn)
Loading