Re: rancilio silvia
"hazchem" <hazchem.discordia@xxxxxxxxx> schreef in bericht
news:1ee2b223-6d0a-4a60-94c9-ed066cd3aa9e@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
The noise level has gone up quite a bit lately. And since I have never
done
much of cleaning the machine (except the head), I thought it needed some
cleaning (descaling perhaps?)....
ahh, well if the noises have changed then yes, a more thorough clean
is probably a good place to start.
Thanks hazchem, I will try cleaning it.
Martijn.
.
Relevant Pages
- Re: rancilio silvia
... The noise level has gone up quite a bit lately. ... much of cleaning the machine (except the head), ... cleaning.... ... ahh, well if the noises have changed then yes, a more thorough clean ...
(alt.coffee) - Re: epson black cartridges
... I would recommend you getting some fresh replacement cartridges for your ... The one continual malody that the 740 has is that drying chrome plated head ... Although you could do a head cleaning by ... The 740 is one of the really good workhorses that Epson produced, ...
(comp.periphs.printers) - Re: i960 prints blanks
... for this to work you need to have all cartridges in place with enough ink to do a nozzle check pattern. ... Need more info. PLEASE - educate yourself a bit by reading the nifty-stuff forum threads on head cleaning. ... Should I buy a new print head? ...
(comp.periphs.printers) - Re: Epson Stylus problem
... This situation is discussed in the Epson Cleaning Manual I provide free of charge when people request it via email. ... there is a vacuum pump engaged which sucks air until a vacuum is created to the printing surface of the head. ... The idea being that this vacuum will pull out any dried or thickened ink plugs from the surface of the nozzles and pull fresh ink down through the head from the cartridges. ... Usually this area is not a pad, but just a funnel shaped drain that also leads to the waste ink pads at the base of the printer. ...
(comp.periphs.printers) - Re: Epson Stylus problem
... Epson Cleaning Manual I provide free of charge when people request it via email. ... there is a vacuum pump engaged which sucks air until a vacuum is created to the printing surface of the head. ... The idea being that this vacuum will pull out any dried or thickened ink plugs from the surface of the nozzles and pull fresh ink down through the head from the cartridges. ... Usually this area is not a pad, but just a funnel shaped drain that also leads to the waste ink pads at the base of the printer. ...
(comp.periphs.printers) |
|
