Re: Convert Vibe to Rotary?
- From: "Robert Harmon" <Texas_Coffee@xxxxxxxxxxxxx>
- Date: Tue, 4 Sep 2007 10:24:01 -0500
First, is the ProCon labeled as NSF certified (not all are & I'm not sure
what the difference is)?
--
Robert Harmon
--
http://www.tinyurl.com/mb4uj - My coffee pages.
http://www.tinyurl.com/2tnv87 - My 'Guidelines For Newbies' page.
http://www.tinyurl.com/2cr3e2 - I have things for sale here.
"( ) David De Cristoforo" <david@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1188918564.481395.274590@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
At a garage sale this weekend, I found a Pro Con pump attached to a
1/3 HP motor for $25 (I think it was used for some kind of "water
feature"). Works fine. I want to use it for my "direct connect"
LaSacala lever machine. Connecting the pump looks pretty straight
forward. I even found a bit on the web by some guy who had done this
on a similar machine. My question is: Can I power the motor by
extending the wires that currently power the machine's vibe pump? In
the article, the guy showed a relay but it was not too clear what the
relay was for. I am presuming that the machine's power leads are going
to one side of the relay and the motor to the other. The motor is 110V
and has a short cord with a standard 3 prong plug. But that would be
very easy to change. I have plenty of room under the counter for the
motor/pump, power is right there if I need it and there is even a hole
in the counter where the current water supply line comes through.
Thanx
DD
.
- Follow-Ups:
- Re: Convert Vibe to Rotary?
- From: ( ) David De Cristoforo
- Re: Convert Vibe to Rotary?
- References:
- Convert Vibe to Rotary?
- From: ( ) David De Cristoforo
- Convert Vibe to Rotary?
- Prev by Date: Convert Vibe to Rotary?
- Next by Date: Re: Convert Vibe to Rotary?
- Previous by thread: Convert Vibe to Rotary?
- Next by thread: Re: Convert Vibe to Rotary?
- Index(es):
Relevant Pages
|
