Is it really important /needed to adjust grind with Mazzer Mini without coffee in it ?



In the manual of my Mazzer Mini E I read that the grind should be adjusted
with the motor running and preferably without coffee between the blades. Is
that really important ? If so, it seems a little complicated to me, because
then I always have to empty it before adjusting. And why has the motor to be
running ?


.



Relevant Pages

  • Re: why does my upper flipper on tftc give out?
    ... Try cleaning / adjusting the ... flipper switch. ... The blades are stacked on the right side, ... extra patience is required. ...
    (rec.games.pinball)
  • Re: band saw tuning frequency
    ... This is adjusting the bearings and guides, ... tracking sould be adjusted as well. ... then adjust the guides to fit where the blades end up. ...
    (rec.woodworking)
  • Re: Ceiling fan - blades not turning
    ... Meat Plow wrote: ... It does not have a remote. ... The blades do not turn but I can hear the motor running when the blades ...
    (sci.electronics.repair)
  • Re: [Life 101] Cost Of Living
    ... raw dollar amounts for things like rent and coffee, without adjusting ... And I don't know where they go to get a $3.50 cup of coffee. ...
    (rec.arts.sf.fandom)
  • Blade CP/CP2 free blades, sim cable, etc
    ... Making blades, building a sim cable, adjusting ... the charger, etc. ... you may want to consider making blades... ...
    (rec.models.rc.helicopter)