Re: Repair my Curve?

A mouse ball is easier to get into. Just take the screws out of the back of the phone? Any chance I'll screw up all the stuff that does work?

Thanks... Bob

"Bill" <bargerw@xxxxxxxxxxxxx> wrote in message news:hQJ6l.748$rF5.40@xxxxxxxxxxxxxxxxxxxxxxxxx
Just like a mouse ball, it needs to be cleaned.

"Bob Newman" <bobnewman@xxxxxxx> wrote in message news:ayB6l.49290$an4.27099@xxxxxxxxxxxxxxx
I have a AT&T BB Curve 8300 about 2 weeks out of warranty. I like it and everything works fine EXCEPT the track ball will not move to the right. All other functions seem to work fine but it will not allow me to access the Contacts list or anything else that requires the right movement of the cursor. Are there any practicle options to replacing the phone?



Thanks in advance... Bob




.

Relevant Pages

  • Re: Tech: Whitewater upper ball popper problem
    ... fails to get the ball all the way over the top and into play. ... I have rebuilt the popper itself, and it ... were stripped & wrong screws installed. ... The end of the wire tube has a pin that plugs into ...
    (rec.games.pinball)
  • Re: TSSP upper eject problem
    ... playfield, it will hit make it hit the ball at a slightly different angle, ... Raise the field and loosen the screws that hold ... > the whole assembly to the playfield. ...
    (rec.games.pinball)
  • Re: Tech: Whitewater upper ball popper problem
    ... fails to get the ball all the way over the top and into play. ... I have rebuilt the popper itself, and it ... were stripped & wrong screws installed. ... The end of the wire tube has a pin that plugs into ...
    (rec.games.pinball)
  • Re: Tech: Whitewater upper ball popper problem
    ... fails to get the ball all the way over the top and into play. ... were stripped & wrong screws installed. ... the alignment pin raises up and out of the hole. ... If you have stripped out screw holes, ...
    (rec.games.pinball)
  • Re: Tech: Whitewater upper ball popper problem
    ... but the No Way Out ball popper 9/10 times ... fails to get the ball all the way over the top and into play. ... were stripped & wrong screws installed. ... the alignment pin raises up and out of the hole. ...
    (rec.games.pinball)