Re: Automotive Question: Trailer Brake Wiring (please don't read if you hate me and-or don't like factual posts)



On Dec 5, 3:48 pm, Retired VIP <jackj.extradots....@xxxxxxxxxxxxxx>
wrote:

I'm sorry, I didn't mean to imply that YOU were a shade-tree mechanic
just that this type if brake controler shouldn't be installed by one.
The problem with this system is that it is incompatable with Anti-lock
systems or traction control system.  It is usually tapped into the
line going to the rear brakes and does require some extra fluid be
displaced by the master cyclinder in order to operate the trailer
controler's rheostat.  Some system won't be able to supply the extra
fluid and still maintain braking balance between the front and back.
Other system might detect a fault because of the extra fluid flow.

sorry i over-reacted, as usual :)
I'm pretty sure this truck has anti-lock brakes on the rear. Looks
like someone screwed the pooch a long time ago if this on-off type is
not compatible! I understand your point .. now. Unfortunately, I
think I'll have to install this thing anyway and let it go as-is (as
long as no wires are melting or pulling too much juice)...

I'm not an expert on brakes but I do know that I'm not qualified to
install one of these controlers.

I can understand why you said this now... I don't think I would want
to do the type you're talking about to anyone's vehicle but my own
without good insurance...

.



Relevant Pages

  • Re: Automotive Question: Trailer Brake Wiring (please dont read if you hate me and-or dont like
    ... just that this type if brake controler shouldn't be installed by one. ... Other system might detect a fault because of the extra fluid flow. ... think I'll have to install this thing anyway and let it go as-is (as ...
    (alt.autos.toyota)
  • Re: Installing Win2K Pro on AOpen AK77-600Max
    ... Have you tried a bios update? ... prior to install? ... > Promise ATA66 controler, this mobo has a Promise FastTrak SATA controler ...
    (microsoft.public.win2000.setup)
  • Re: Wrenchin on the Bagger - Cruise Control
    ... Planned to install it tomorrow, but figured I'd saunter out to the barn ... increasing & decreasing speed, tested foot brakes & hand brakes, reduced ... hydraulic clutch on Saturday. ...
    (rec.motorcycles.harley)
  • Re: AWD car needs a new tire; Replace one or all 4
    ... If you install new pads onto that surface you may only have 10% of the actual friction surface contacting the rotor. ... Turning the rotor so it is flat and even means much less chance of problems and the brakes work as they should as soon as they get installed. ... Vehicle owner picks it up and drives down the road. ... In this case they will probably ask if it is industry standard procedure to install pads ONLY without turning or installing new rotors. ...
    (rec.autos.tech)
  • Re: Adaptec SCSI RAID Problems
    ... > Just tring to install C3 on a server. ... > recognise the SCSI RAID5 Array. ... > It is running an Adaptec AIC-7899W SCSI Controler ... > controling the raid. ...
    (Fedora)