Re: Automatic Trainee Filter

If you've never dropped the pan and wipe clean the magnets then it
would be a good idea. You can get a Fram ATF kit from your local parts
store, should be about $20. It includes a new strainer and cork-rubber
gasket. Works very well.

Cleanliness is important when working with transmissions. Make sure no
lint or dirt that can plug valve bodies get in there. Make sure the
magnets are put back to their original locations and do not block the
pickup port of the strainer or interfere with anything else.

Do let us know what you find in the pan and strainer. Thanks.






On Jul 27, 7:21 am, Windsurfer <besw...@xxxxxxxxx> wrote:
If I change the fluid in my 4-runner, should I also change the filter
since it has passed 150K?

.

Relevant Pages

  • Re: Small STRONG Magnets
    ... I did something similar with Aluminum ruler between two hard drive magnets ... Currently available two pan mechanical scales also use magnetic damping. ...
    (rec.crafts.metalworking)
  • Re: Transmission trouble
    ... I have replaced the strainer a couple of times in the past, ... Besides the ATF drain, consider doing the differential too, if the ... pan and replace the strainer and pan gasket. ... fluid level accuracy are important when working on transmissions. ...
    (alt.autos.toyota)
  • Re: How to split (or combine) magnetic force?
    ... Start with a bar magnet that can lift 1/4 kilo. ... Lift iron with magnets. ... Add weights to pan until block falls. ... I don't have two magnets of the same size in house. ...
    (sci.physics)
Loading