Re: vibration in steering wheel and floor?

On May 31, 9:58 am, Jeff <kidsdoc2...@xxxxxxxxxxx> wrote:

This could prove to be a bit difficult with a 5-speed.

Well, once the car is on the lift and off the ground (it only needs to
be a few inches off the ground), get in the car, start the motor, put
the gear shift in first gear and let out the clutch. In fact, you don't
have to put it in first gear. You could use any gear, even reverse.

It is no harder than with a automatic transmission or even a CVT.

Jeff


Yeah, you're right. Having the car inches off the ground would be
better than a foot. Actually, now that I think of it, when the car is
in neutral and is elevated, the wheels spin very slowly anyway. Is
this odd?


.

Relevant Pages

  • Re: 1987 tercel wagon 2WD....
    ... what if I want to lift the car 2 inches while im replacing...what is ...
    (alt.autos.toyota)
  • Re: Fastening Fiberglass Spoiler ?
    ... >> John S. wrote: ... Poor little car... ... > spoiler hit the legal speed limit in first or second gear. ... and require a little deeper first gear than an American car. ...
    (rec.autos.tech)
  • Re: Fastening Fiberglass Spoiler ?
    ... The poor thing was begging to be set free of ... > and require a little deeper first gear than an American car. ... That's pretty tall gearing in that Stude. ...
    (rec.autos.tech)
  • Re: 2004 dodge intrepid transmission
    ... the car doesn't shift back down to first gear. ... overdrive or something, code is p0700 transmission moudle failure, ... If the speedometer wasn't working also then the output speed sensor ...
    (rec.autos.makers.chrysler)
  • Re: vibration in steering wheel and floor?
    ... once the car is on the lift and off the ground (it only needs to ... the gear shift in first gear and let out the clutch. ... Having the car inches off the ground would be ... the wheels spin very slowly anyway. ...
    (alt.autos.toyota)