Re: Brake Lights

Replace the fuse. Sometimes they look OK, but they aren't. They are cheap
too.

"MJD" <jerry@xxxxxxxxxx> wrote in message
news:dv54jm$28rq$1@xxxxxxxxxxxxxxxxxxxxxxx
Dan, bulbs look OK..also hatch break light is out.

thanks
jerry



"Dean Dark" <ddrake@xxxxxxxxxxxxxxxxxxx> wrote in message
news:mrvb12dsft2kgncvqomqv3e74fvlv3q339@xxxxxxxxxx
On Tue, 14 Mar 2006 09:29:56 +1100, "MJD" <jerry@xxxxxxxxxx> wrote:

Hi to everyone,

Just noticed that all brake lights are not working on wife's 95
316. I did check the fuse & it looks OK.
Any hints what to check next, please?

The bulbs?

I once wasted half a day tearing things apart to get at the wiring,
only to discover that both bulbs had failed more or less
simultaneously.
--
Dan.




.

Relevant Pages

  • Re: The endless #47 vs. #44 bulbs debate revisited
    ... all #47 bulbs when restoring them, but the crap quality of the #47 bulbs ... plus the large box full that I'd previously removed from other games. ... being on for a few minutes, this game's fuse was failing. ... burnt-up 2 pin connector for the transformer feed was the last thing needed. ...
    (rec.games.pinball)
  • Re: Blinker kills engine
    ... Bare wires usually cause a fuse to blow, and it's very possible that bulbs ... Power goes out A phase and returns to B phase to C phase and back to A phase ... measure the voltage from phase to neutral and compare it to the voltage from ...
    (rec.motorcycles.tech)
  • Re: Blinker kills engine
    ... Bare wires usually cause a fuse to blow, and it's very possible that bulbs ... Power goes out A phase and returns to B phase to C phase and back to A phase ... measure the voltage from phase to neutral and compare it to the voltage from ...
    (rec.motorcycles.tech)
  • Re: Internittent top right flipper Stern Elvis. Advice anyone ?
    ... Hopefully the bulbs are just burned out. ... Won't be a fuse, different circuits. ... Flipper - You'll have to get in there and check some basics. ... the coil, and especially the tiny wires coming off the coil to the lugs, be ...
    (rec.games.pinball)
  • Re: This schematic doesnt make sense to me
    ... It won't be the first time factory schematics have ... I would assume that fuse should be LESS ... it has 4 strings of 4 ... bulbs constantly flashing, ...
    (rec.games.pinball)