Re: clock problem 420 sel
If fuse is bad, your entire cluster doesn't work... tach. too...
Best bet is to replace or swap out the tach/clock portion of the cluster
with a working one of 86-91 gas engine unit.
- Re: [patch 2/3][rfc] swap: try to reuse freed slots in the allocation area
... But the clustered slot allocation will go ahead allocating after this ... cluster offset to it. ... context when reading surrounding swap slots optimistically. ... so as not to stop at the holes. ...
- Re: 1992 Plymouth Acclaim Tachometer
... Is this a big job (ie: remove dash, etc) or should I just live without ... I remember removing the tach on my 89 Acclaim, and it was easy enough, ... I was able to fix the tach by cleaning and slightly deforming the electrical ... The cluster is easy to remove on this model. ...
- [PATCH 7/9] swapfile: swap allocation use discard
... discard the old contents of the cluster if the device supports discard. ... But don't bother when swap is so fragmented that we allocate single pages. ... unsigned int highest_bit; ...
- SUMMARY: Swap space leak on Clustered E450s with Solaris 8
... I've setup a script to grab the output of the swap -l command on regular intervals to determine if we are actually seeing "shrinkage" or not. ... Swap space leak on Clustered E450's with Solaris 8 ... We have noticed the following problem on nearly every one of our Sun Cluster 2.2 clusters. ...
- Re: 93 Mustang tach shows 2000 rpm at idle. seems like 2000 rpm is the new zero???
... the tach head can be removed from the plastic ... substrate and housing. ... >> Go to junkyard, get complete cluster, take out your cluster, replace ...