Re: 1980 450sl does not run when warm

Then adjust the fuel mixture with 2.5mm allen wrench in that hole by the air
flap...It is too rich which is why it died when hot.


.

Relevant Pages

  • Re: guitar refinish
    ... At that pitch the sound output from the the hole and the top is ... thanks for that simple answer to the fundamental operating modes of the guitar that has puzzled me for a while. ... resonance directly, and so, indirectly, the pitch of the 'main air' ...
    (rec.music.classical.guitar)
  • Re: evolutionary dead end?
    ... Opening a hole in the guitar body effects the different air resonances ... In the low 'Helmholtz' type resonance the pressure changes everywhere ... I simply stated an open harmonic bar lowers the plate frequincy." ...
    (rec.music.classical.guitar)
  • Re: Ever done this?
    ... | One very embarrassing moment for me was a demo to a teacher in our school, ... |> the 110 bell circuit already wired to one of the switches. ... |> Second tap and the box breaks off, the bell starts ringing and air ... |> standing there under a ringing bell with my finger blocking the hole. ...
    (alt.security.alarms)
  • Re: need advice for homade propane furnace
    ... I've used every combination of upwind/downwind and pipe size combo's you ... Your probably not getting enough air in at the burner. ... smaller than 1/16" so that's what size hole I have for fuel jet. ...
    (rec.crafts.metalworking)
  • Ever done this?
    ... knock out the knock out on the back of the box - careful of the 110 bell circuit already wired to one of the switches. ... Second tap and the box breaks off, the bell starts ringing and air shoots out of whats left of the pipe ... I put my finger over the hole to keep whats left of the air pressure in the system until I can get the water shut off ...
    (alt.security.alarms)