Re: Re: 1999 E320 Climate Control backlight ( lighted display )

Thank you very much for the response !!!

"Kenneth P. Stox" wrote:
dude wrote:
The backlight for the display on my 1999 E320 climate
control
sometimes is on and sometimes is not on. Its frustrating at
night when
it does not work at i cant see the temperature ? any idea
how to fix
this ??

Bulb in holder is probably loose. Pull the climate control
unit ( uses
the same keys as the stereo, about $12 at the stealership ),
and on the
bottom you will see what looks like a button. A quarter turn
counter-clockwise, and pull it out. Push the bulb back in. If
the bulb
does not appear loose, I would just replace it.
.

Relevant Pages

  • Re: 1999 E320 Climate Control backlight ( lighted display )
    ... it does not work at i cant see the temperature? ... Bulb in holder is probably loose. ... Pull the climate control unit, and on the bottom you will see what looks like a button. ... If the bulb does not appear loose, ...
    (alt.auto.mercedes)
  • Re: Residual voltage at lantern when slider at off /zero
    ... She then ties the rope at the top of the flex and pulls twice and it ... However on the third pull it slides down the flex and pulls off the bulb ... the bare wires he tries to refit a bulb holder but he is very poor at ...
    (rec.arts.theatre.stagecraft)
  • Re: Residual voltage at lantern when slider at off /zero
    ... If you had a dummy load on the dimmer you could alter that, ... However on the third pull it slides down the flex and pulls off the bulb ... the bare wires he tries to refit a bulb holder but he is very poor at ...
    (rec.arts.theatre.stagecraft)
  • Re: Residual voltage at lantern when slider at off /zero
    ... circuit could become live and hurt someone. ... However on the third pull it slides down the flex and pulls off the bulb ... the bare wires he tries to refit a bulb holder but he is very poor at ...
    (rec.arts.theatre.stagecraft)
  • Re: Residual voltage at lantern when slider at off /zero
    ... You would probably get away with it because the voltage at zero is pretty ... However on the third pull it slides down the flex and pulls off the bulb ... the bare wires he tries to refit a bulb holder but he is very poor at ...
    (rec.arts.theatre.stagecraft)