What is function of black plastic tubes connected to idle air control valve on 560?

Black tubes about an inch in diameter on inside of each valve cover. They
don't seem to connect to anything.


.

Relevant Pages

  • Re: Press and interference fits...Help!
    ... Allowance for Forced Fits.?The allowance per inch of diameter usually ranges from ... On the other hand, the taper fit is less reliable, because if it loosens, the ... Pressure for Forced Fits.?The pressure required for assembling cylindrical parts ...
    (rec.crafts.metalworking)
  • In RHFs never ending quest to answer "EVERY" post.....
    ... There is an initial permeability spec, which is the number that we look at, ... the closer the effective permeability will be ... I have used 8 inch long rod material that is 3/8 inch in diameter and I have ...
    (rec.radio.shortwave)
  • Re: In RHFs never ending quest to answer "EVERY" post.....
    ... There is an initial permeability spec, which is the number that we look at, ... the closer the effective permeability will be ... I have used 8 inch long rod material that is 3/8 inch in diameter and I have ...
    (rec.radio.shortwave)
  • Re: heat resistant coiled conductor
    ... In the prototype I wound automotive zip cord around the tubing (with ...  a quarter inch inside diameter or slightly less, ... the cables come half inch I.D. and bigger. ...
    (sci.engr.mech)
  • Re: loopstick antennas, interesting data
    ... There is an initial permeability spec, which is the number that we look at, ... the closer the effective permeability will be ... I have used 8 inch long rod material that is 3/8 inch in diameter and I have ...
    (rec.radio.shortwave)