W123 Steering Wheel Removal

1985 230CE. I need to remove the steering wheel but the bolt is very tight
as if someone used green Loctite on the threads. There is green paint on the
head of the bolt. I am using a strong impact wrench. It removed the crank
pulley bolt with ease.

Any suggestions?

Thanks, Scott


.

Relevant Pages

  • Re: W123 Steering Wheel Removal
    ... as if someone used green Loctite on the threads. ... head of the bolt. ... I am using a strong impact wrench. ... pulley bolt with ease. ...
    (alt.auto.mercedes)
  • Re: New Yam-Maj Oil Change Method
    ... Problem is that there is little room for the hammer, ... |>Well, I can't say I've never done it that way, but the bolt shouldn't be that |>tight really. ... |>> |>As tight as you can by hand while using the socket and the strong lever. ...
    (rec.motorcycles)
  • Re: A Money Pit
    ... I then runit back out until it is tight and spray on more ... >>much pressure on the bolt. ... That must be frustrating, knowing how to do it yet not being able to ...
    (rec.autos.makers.vw.aircooled)
  • Re: Stripped Crank Bolt 06 YZ250FV
    ... All's well until it's time to pull the crankcase oil drain bolt. ... Sucker's on there so tight the bolt strips. ... I'd try heating up the engine case locally with a hot air gun (don't ...
    (rec.motorcycles.dirt)
  • Re: Stripped Crank Bolt 06 YZ250FV
    ... All's well until it's time to pull the crankcase oil drain bolt. ... Sucker's on there so tight the bolt strips. ...
    (rec.motorcycles.dirt)