Re: 84 300SD blowing air, but no heat

check the monovalve insert and solenoid.
Hank
"Mia" <maxvalery@xxxxxxxxx> wrote in message
news:1130163164.099036.103940@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Hi,
>
> I was wondering whether anyone encountered the following problem: when
> the heater is turned on, only the cold air is coming out of the vents.
> I noticed sometimes when the car idles, the air gets hot only by the
> windshield vent. Also, the air always gets cold once the car starts
> moving and never gets hot again.
>
> Thermostat? Heater core? Where? How? How much?!
>
> :)
>
> Thanks!
>
> Mia
>


.

Relevant Pages

  • Re: heater aggravation
    ... > changed twice, and heater resistor cleaned. ... > resistor, but the wrong replacement resistor came in to my mechanic. ... since the air down at the feet is much ... If the heat control is set to high -- full red zone on the dial -- nearly all of the air is sent through the heater core to be heated before entering the cabin. ...
    (alt.autos.toyota)
  • Re: heater aggravation
    ... Absolutely no signs of core/coolant problems, fan ... changed twice, and heater resistor cleaned. ... since the air down at the feet is much ...
    (alt.autos.toyota)
  • Re: 1.8CVH running very cool
    ... edge of cold and only a tad above. ... heater, a mate of mine had a F reg pinto sierra and the heater on ... It's not randomly going up and down like an air lock. ... forced up through the larger pipe to the bottom of the expansion tank. ...
    (uk.rec.cars.maintenance)
  • Re: 1.8CVH running very cool
    ... edge of cold and only a tad above. ... and the heater on that was crap, he tried everything to sort it ... expansion tank cap off, it will eventually push the air out. ... It's not randomly going up and down like an air lock. ...
    (uk.rec.cars.maintenance)
  • Re: 2001 Intepid SE Windows Fogging
    ... The air that is exiting the defroster ... and the heater are definitely warm to hot. ...
    (rec.autos.makers.chrysler)