please help ASAP 2611 issue

Hi everyone
the issue I am having with this one 2611 is that when it first came in
this is the message I have gotten.

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory

open: file "n" not found
open(): Open Error = -1
loadprog: error - on file open
boot: cannot load "flash:n"

This made me think that the previous IOS was corrupt or missing but
when I did a dir flash: commmand it showed the flash name and
everything.

rommon 1 > dir flash:
File size Checksum File name
5426208 bytes (0x52cc20) 0x1ad4 c2600-i-mz.122-12a.bin

I resinstalled a new IOS twice so far and what happens is it brings me
into a configuration mode of 0x102. It has a password which is weird
because it should not have one. When I try to recover password using
confreg 0x2142 this is the message that I get.

oh01rtr4>confreg 0x2142
Translating "confreg"...domain server (172.17.16.120)

Most commands do not work and will do the same. show ver does work and
this is the version.

oh01rtr4>show version
Cisco Internetwork Operating System
Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(12a), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 24-Sep-02 01:05 by pwade
Image text-base: 0x8000808C, data-base: 0x809E1544

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

oh01rtr4 uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.122-12a.bin"

cisco 2611 (MPC860) processor (revision 0x203) with 24576K/8192K bytes
of memory
..
Processor board ID JAD05290XXG (762432776)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x102

oh01rtr4>

I have no idea what else I could do to this thing. If anyone has any
ideas please share.

Thank You

Sincerely
Sam
.

Relevant Pages

  • Re: Spartan 3 Configuration Questions
    ... the Flash and send the configuration bit stream to the FPGA. ... (I've considered using the FPGA Master Serial mode to clock the SPI ... so I'm trying to use a .bin file. ...
    (comp.arch.fpga)
  • Re: Spartan 3 Configuration Questions
    ... I'm storing the configuration file in SPI Flash and using a uP to ... (I've considered using the FPGA Master Serial mode to clock the SPI ...
    (comp.arch.fpga)
  • Re: Spartan 3 Configuration Questions
    ... the Flash and send the configuration bit stream to the FPGA. ... (I've considered using the FPGA Master Serial mode to clock the SPI ... so I'm trying to use a .bin file. ...
    (comp.arch.fpga)
  • Re: Spartan 3 Configuration Questions
    ... the Flash and send the configuration bit stream to the FPGA. ... (I've considered using the FPGA Master Serial mode to clock the SPI ... so I'm trying to use a .bin file. ...
    (comp.arch.fpga)
  • Re: CPLD-SPI_flash configuration system problem.
    ... Do you use any special software tools for reading the .bit file and flash ... My FPGA is set up to serial master configuration mode. ... generating the clock for the CPLD and the CPLD transfers the data from ...
    (comp.arch.fpga)